Jaguar recall: Security Guidance
Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. There is no fault with Jaguar…
Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
Jaguar Land Rover in conjunction with law enforcement and insurance bodies is aware of the increase in thefts of vehicles in specific geographical locations within the United Kingdom. There is no fault with Jaguar…
Affected vehicles could experience venting of the 12 Volt batteries. Customers may experience one or more of acid smell or smell of rotten eggs in the cabin hissing sound the battery visibly venting gas…
For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze…
For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze…
For affected vehicles that previously had the chassis frame replaced in a special facility there is a possibility that some joints were not correctly tightened.
On affected vehicles the Parking Assist ECU software may cause (1) the rearview image to freeze briefly during the backing event if reverse is selected within a specific time after ignition is turned on;…
On affected vehicles the chemicals in the Takata airbag inflators may deteriorate over time. This may cause the inflators to rupture with too much force in a crash leading to serious injury or death…
On certain 2021 to 2024 Model Year Jaguar E-PACE vehicles during a passenger airbag deployment the airbag may tear as a result of improper folding of the airbag during the airbag assembly process.
For certain machines there is an increased risk of stalling at low revs for where loss of power cannot be ruled out.
For certain machines there is an increased risk of stalling at low revs for where loss of power cannot be ruled out.
A quality check has revealed that the affected G61 vehicles software does not reflect the associated CoC documentation.
On affected vehicles the AC inlet socket and the power outlet for body builder equipment might be incorrectly energized. Therefore in vehicles where AC or DC power outlets are installed there might be voltage…
On affected vehicles the front left and right control arm ball-joint bracket screws are at risk of fracture which could affect the vehicle's controllability.
On affected vehicles the front left and right control arm ball-joint bracket screws are at risk of fracture which could affect the vehicle's controllability.
For certain vehicles equipped with the combination meter system (where various information is displayed) that due to an improper programming of the combination meter unnecessarily repetitive data is written to a memory device. This…
For certain vehicles equipped with the combination meter system (where various information is displayed) that due to an improper programming of the combination meter unnecessarily repetitive data is written to a memory device. This…
For certain vehicles there is an error in the specific software calibrations of the Engine Control Unit. In certain cases this condition may result in a delayed activation of the malfunction indicator (MIL) allowing…
On affected vehicles rear brake drums (eDrums) may be missing the reaction block bolts or fitted with reaction block bolts which were not tightened correctly. Missing or loose bolts could result in wheel lock…
On a number of 2022-2026 Jeep Grand Cherokee Plug-In Hybrid Electric Vehicles (PHEV) due to a software error the Hybrid Control Processor (HCP) may incorrectly interpret a signal from the Battery Pack Control Module…
Affected vehicles may experience a fuel leak from the fuel rail due to a manufacturing defect.
On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.
On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.
For affected vehicles there is concern that the left side headlamp beam may be out of alignment.
On affected vehicles there is a risk of the loss of crankshaft reference position that can result in an engine stall as well as loss of the ability to restart the engine. A loss…