Daimler Truck ATEGO 967 and Atego Ii recall: Rear axles may crack / fracture
The rear axle casings may crack and oil may leak. In extreme cases the axle casing may fail.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
The rear axle casings may crack and oil may leak. In extreme cases the axle casing may fail.
The rear axle casings may crack and oil may leak.In extreme cases the axle casing may fail.
Due to a lack of durability the steering lever may fracture at its fixings.
A potential chafing condition has been identified between the alternator power cables and coolant pipe which may result in short circuit .Electrical cables might short circuit.
The sealing arrangement within the filler neck may be distorted and allow fuel to leak. This may be noticeable as wetting or a small volume within the dust cap. It is more likely to…
The Occupant Restraint Controller (ORC) may experience a loss of air bag and seat belt pretensioner deployment capability during a crash due to a shorting condition resulting in a negative voltage transient that travels…
The striker wire on the bonnet lining may not have sufficient support to prove it with the security for its intended purpose. This can lead to incorrect locking of the bonnet over time and…
The vehicle sensitive locking mechanism for the front seatbelts may be incorrect causing either the belt not to lock or the webbing very difficult to pull out. If the locking mechanism does not function…
The screwed connection between the frame and the fixed bearing stud for the rear swinging arm may loosen. This results in the rear wheel not being kept aligned as required causing reduced rear wheel…
Due to a manufacturing issue with the front lower ball joint there is a possibility that the surface of the ball joint may be damaged while driving. If the vehicle is operated continuously the…
On affected vehicles the clip that retains the gearshift cables may not be fully engaged with the metal portion of the handbrake cable.
The engine fuel return pipe is made of material which may adversely react with chemicals paint etc. These may cause the pipe to swell become loose and leak fuel.
Affected vehicles may have received the wrong replacement airbag assembly through a previous recall. This replacement air bag may not deploy as intended.
Due to possible loosening of the adjuster lock nut parking brake lever travel may become excessive and the parking brake may not be fully applied. If the vehicle is not parked in accordance with…
The countershaft 5th gear dogs used for engaging 3rd gear are broken. Although the material strength of the gear has been increased the fatigue strength was decreased due to the removal of shot peening…
The frame of the machine may develop a crack. Should a crack develop as it gradually develops the steering and handling will get progressively worse. If not repaired the frame could beak rendering the…
The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
If the retaining ring inside the steering gear has not been fitted correctly the sealing cap would not be fixed axially and might start moving. If the sealing cap has moved the ball return…
The flange nut can seize on the thread of the studs in the fuse box which could mean the terminals do not have the correct torque and may be loose. Electrical cables connected to…
The bolts retaining the offside front leaf spring (or springs) and support bracket(s) may not have been tightened to the correct specification. If a support bracket disconnects this could affect the steering.
Due to an error in the manufacturing process the lower steering shaft universal joint may not have been produced to the correct specification. Under heavy steering forces it is possible for the column shaft…
The tyre may develop an uneven shaped tread area which may affect tyre performance and vehicle handling.
Due to an error in the manufacturing process the lower steering shaft universal joint may not have been produced to the correct specification. Under heavy steering forces it is possible for the column shaft…
The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.