Vauxhall Insignia recall: Reduction in braking performance
An incorrect front brake hose may have been fitted which may allow brake fluid to leak
Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
An incorrect front brake hose may have been fitted which may allow brake fluid to leak
There is a possibility that a leak may occur in the fuel delivery line. Prolonged use of the car could result in the possibility of a fuel leak at the engine end of the…
It has been established that the welding on the foot bracket of the shock absorber is not to specification. This can result in the failure/detachment of the foot bracket which could cause loss of…
On affected vehicles the Left Hand Inner Sill Panel may be cracked. During an impact on the left hand side there is a risk that underfloor fuel lines will be ruptured and result in…
It has been identified that due to a quality issue a crack or fracture can develop in the fuel passage of the fuel injector. This could therefore result in a fuel leak and possibly…
It has been identified that the 3rd row seat belt stalk mounting bolt may not have been tightened to the correct specification during body modification. There is the possibility the seat belt mounting bolt…
In instances where the fuel tank is overfilled and in particular handling conditions liquid fuel could reach the fuel system carbon canister. Fuel reaching purge valves could affect functionality of the fuel EVAP system.…
It has been identified that the dimensions of the fitting bracket which secures the fuel tank to the frame are incorrect and this can cause the bracket to contact the fuel tank. This may…
It has been identified that water/moisture can enter the Sub-Switch Assembly and contaminate the main switch circuit board. This can possibly cause corrosion of the main switch electric terminal. In the worst case this…
The driver side front seat belt pre-tensioner cable could separate during deployment leaving the driver inadequately restrained in a collision which increases the risk of injury.
It has been identified that the density of the propellant within the airbag inflator may be insufficient due to inappropriate production and storage conditions of the propellant. In this condition the inflator may abnormally…
On the affected vehicles a possible non-conformity in the positioning of the fuel filler neck seal near the filler cap could cause a fuel leak when completely filling up the tank.
The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo
The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.
On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended…
On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended…
It has been identified that the fuel filler neck assembly may not have been correctly installed at production. This can therefore result in a fuel leak from around the fuel filler area if the…
It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However if not rectified there is a…
It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However it not rectified there is a…
It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions…
It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions…
The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.
It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should…
It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should…