Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
A number of vehicles could potentially be affected by water ingress in the Body Control Module (BCM) leading to corrosion inside. Water ingress into the BCM may prevent exterior lighting components from functioning as…
On affected vehicles a sub-component of the belt force limiter in the front seat belt retractors may be damaged. Either one or both front seat belt retractors may be affected.
The fuel tank may have been produced with a manufacturing defect which may result in fuel leakage in a limited number of vehicles
Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.
Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.
Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.
On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.
On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.
On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.
On affected vehicles the high-pressure fuel pumps may not be correctly secured which may lead to a fuel leak.
Vehicle reliability and your safety are a major concern for Jeep. The 2nd row head restraints on some 2023-2024 Grand Cherokee vehicles may contain an internal locking mechanism which can prevent the headrest from…
Incorrect assembly and torquing of the steering column components installed on the Tractor may have occurred which can lead to a loss of steering control.
Incorrect assembly and torquing of the steering column components installed on the Tractor may have occurred which can lead to a loss of steering control.
On affected vehicles a firmware feature that allowed for high-speed sampling of the right front window motor encoder was not enabled bringing vehicles out of compliance with the relevant regulations for Auto-reversing Requirements.
On affected vehicles there is a potential software issue causing the rear-view camera not to function as intended.
Vehicle reliability and your safety are a major concern for Alfa Romeo. On some Alfa Romeo Tonale vehicles the infotainment display may not activate at key-on remaining completely black. This situation is a non-compliance…
On affected vehicles the front seat belts may have damage to the torsion bar caused during manufacture. The retention function of the seat belt may not perform as expected in the event of an…
On affected vehicles the front seat belts may have damage to the torsion bar caused during manufacture. The retention function of the seat belt may not perform as expected in the event of an…
On affected vehicles a fracture of the shock absorber's top bush eye ring may result in reduced ride quality and compromised handling.
On affected vehicles the high-pressure fuel pump may not have been properly fastened to the cylinder head during assembly. If the sealing connection is not secure fuel can escape under high pressure resulting in…
On affected vehicles there is a possibility of a loss of braking assistance caused by a fault with the electromechanical brake servo.
For affected vehicles the back door hinge pins may have been incorrectly assembled during production. In this condition the back door hinge pin may be missing.
For certain non-road mobile machinery (NRMM) a crack in the corrugated section of the LPL-EGR pipe of the engine may occur.
Affected vehicles may have an incorrect speed limitation value displayed on the instrument cluster due to a wrong configuration.