Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
The function of the side airbag may be restricted due to the airbag not being sufficiently secured to the front left seat frame.
On certain trailers the brake compensator nuts may not have been tightened correctly this may result a deterioration in braking performance.�
On certain vehicles with electromechanical brake servo and DSG (Direct Shift Gearbox) of a limited production period there is a possibility that a heat protection mat was incorrectly fitted. In individual cases the brake…
On affected vehicles a 12V ground connection bolting under the driver seat might not meet specifications.�
On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.
On affected vehicles there is concern that the structural adhesive applied to the bodyshell has been mis-applied.
On affected vehicles a Gel battery can without warning crack open. The GEL battery can produce an internal spark in the battery potentially igniting the hydrogen gas inside the battery.�
On affected vehicles cylinder head cover may not be sufficiently shaped in a specific area hairline cracks or more serious leaks may occur due to vibration or heat.
On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.�
Affected vehicles may have an engine that was incorrectly assembled due to improper setting of the high-pressure fuel pump and/or improper setting of the timing belt.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
On affected vehicles under specific conditions (such as electric driving in wet weather) the required operating force of the brake pedal for a deceleration intended by the driver might be increased.�
The fuel pump impeller could swell and cause the fuel pump to stop working.�
FHE/FME vehicles have been delivered with screw joints inside the traction voltage batteries that might not have been tightened according to our assembly process.
The rear view mirror's lens may dislodge from the housing.
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.�
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the three screws connecting the electric motor to the steering gear are potentially not fastened correctly.
On certain vehicles the side airbag fitted in the seat (front left) may not have been correctly secured onto the seat frame.
On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high.� The high-mounted brake light may become less visible while driving and the aerodynamics…
On affected vehicles the High Voltage (HV) battery may be missing the homologation label.
On affected vehicles due to a programming error there is a possibility that a multi-information display used for warning and indicator lights vehicle gauges messages etc will become blank and will not display certain…
Affected vehicles may have a non-conforming tightening torque applied to the 12V battery recharge cable the two ground cables and the two HV (high voltage) connectors. This could potentially lead to a fire in…
Affected vehicles may have been built with an incompatible rear view camera system and radio combination that may prevent the rear-view image from displaying during a reversing event under certain conditions.