Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
Due to a deviation in the suppliers production process a specific squib batch may not comply with specifications In the event of an accident during which the left hand seat belt tensioner in the…
Under extreme starting conditions (such as full throttle) on wet road surfaces AND with repeated short term rear wheel spin strong torque peaks in the powertrain may occur.This may cause an axle mounting flange…
The strap of the diesel filter may brake causing the diesel filter to disconcert from its holder. Possibility of a noise in the engine compartment and in extreme cases fuel leakage.
The vehicles electronic control unit (ECU) may have been incorrectly updated. This may affect the operation of systems controlled by the ECU
The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be…
It is possible the tempering process for the rear wheel bearing housing was not correct. This could allow the housing to crack and fail
The engine control unit may not have the correct software. This may affect power and emissions outputs.
The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be…
An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.
An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.
An incorrect specification driver or front passenger air bag assembly may have been installed during production. As a result the airbag(s) may not deploy as intended.
It has been identified that in certain cases the driver is able to manoeuvre the vehicle with the middle door open without a visual or audible warning. Risk of the vehicle being driven with…
The holes in the rear shock absorber tie-rod frame mounts can become elongated if the rear shock absorber bottoms out. This could cause the tie rod installation bracket to break.
The High Load parameter setting of the Electronic Braking System may not have been correctly programmed. In extreme instances this may affect EBS brake application and vehicle stability.
On affected machines there is a risk of one of the link leads to the regulator rectifier developing an electrical short. A bracket introduced at the start of production may interfere with the link…
A brake hose crimp connection could come loose and cause a reduction in braking effort.
Due to a deviation in the production process certain suspension and steering fixings may not have been tightened to the correct torque.
Due to a deviation in the production process certain suspension and steering fixings may not have been tightened to the correct torque.
Indian Motorcycle has determined that some motorcycles equipped with halogen headlights may have been assembled using a non-compliant headlight not matching destination market requirements. Certain International models may be equipped with an SAE (North…
A steering shaft coupling may not have been correctly manufactured. This may create a clicking noise and the steering may become restricted.In extreme instances the steering may lock.
Due to a software issue the Instrument cluster may intermittently go blank.
Necessary technical acceptance not carried out by Porsche AG prior to sale of certain Porsche company cars. As a result one pre-owned vehicle does not comply to the latest standards and related quality standards.
The propellant (ammonium nitrate) in the inflator of the drivers and passengers front airbag inflator may deteriorate due to high temperature and humid conditions over a longer period in use. As a result the…
The driver may experience sudden loss of power assistance to the steering due to voltage irregularities in the Electro Hydraulic Power Steering system. The driver will have to apply increased effort to steer the…