Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
The battery supply line for the engine electrical system may be incorrectly routed and could result in a short circuit. This will produce a thermal overload of the battery line and melting of the…
The subject vehicles are equipped with right front seat side airbags which may not deploy in a collision as intended.
The heated washer jets fitted to some Kuga vehicles may have jet heating elements that are not correctly sealed. There is a possibility that poor sealing could lead to corrosion due to water ingress…
It is possible a recess on the inside of the instrument panel was not machined correctly. The recess is the predetermined break point of the instrument panel when the front passenger airbag is activated.…
Securing nuts at one of the upper steering column attachments may be issing or loose. Also the universal joint cross screw joint in the upper steering column must be checked
On the affected vehicles the bonding of the front bumper trim may not conform to specification. Over time the bonding may allow the trim to detach
When trying to drive off uphill from a standstill the vehicle may roll backwards. This is because of a software problem in the CMU.
The nearside front passenger detection mat was not fitted during production of the seat. No alarm or warning lamp will warn the driver if the front passenger has not fastened the seatbelt.
One or more of the mounting points between the runner and the driver�s seat may fail.
Water may penetrate the tailgate strut cylinder. This may cause corrosion which may affect the strut's attachment.
Rear lights / brake lights may fail during operation creating an increased risk of accidents.
It has been identified that the connection block/shaft between the splined parts of the steering rack and steering column have not been manufactured to specification. This can result in the splines not engaging in…
Due to a non conformity in production an engine fuel pie protective sleeve could cause wear due to contact with surrounding components.This may cause a fuel leak
Due to a non-compliance in the surface treatment on the fork tubes cracks may appear. This may lead to breakage of the fork tube
A design error stops the sensing working on the door when it is depowered. If an object/person is in the centre of the door frame at the depowering moment they could be pinched.
The front suspension wishbone fixing bolts may have a non-conformity which could lead to a risk of them breaking. The driver would be aware of a change in the behaviour of the vehicle�s directional…
The locking ring retaining the fuel delivery module into the fuel tank may not have been correctly assembled onto the fuel tank during the tank assembly process. The driver may smell an increase in…
The driver will not be alerted to a failure of one or both of the front directional indicator lamps. This could lead to an extended period of driving with failed lamps where other drivers…
On affected vehicles the drivers front airbag inflator could produce excessive internal pressure. If an affected airbag deploys the increased internal pressure may cause the inflator to rupture. In the event of an inflator…
The fuel return hose may leak. Increased fuel odour may be noticed and drivers may also observe liquid fuel puddles underneath the vehicle. It is possible that fuel may leak onto the road surface…
The connection sleeves of the engine oil cooler pipes (feed and return) may not have been crimped correctly. This may result in the connection sleeves becoming loose and engine oil suddenly escaping. If the…
The fuel return hose may leak. Increased fuel odour may be noticed and drivers may also observe liquid fuel puddles underneath the vehicle. It is possible that fuel may leak onto the road surface…
The printed circuit in the power supply unit may overheat.
If the water drain in the area of the panoramic sunroof is not functioning properly water can seep into the vehicle�s headliner. If sufficient water accumulates the foam adjacent to the pressure cylinder of…