Polestar Automotive PS2 recall: PS2 Seat Bolts
On affected vehicles it has been identified that the four bolts on the left front seat may not have been torqued correctly at the factory.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
On affected vehicles it has been identified that the four bolts on the left front seat may not have been torqued correctly at the factory.
On certain vehicles the Integrated Brake (IB) system may be impaired due to contamination between electrical contacts.
On certain vehicles the Integrated Brake (IB) system may be impaired due to contamination between electrical contacts.
Affected vehicles may experience a lack of lubrication to the rear wheel bearings leading to premature failure.
On affected vehicles the HECU (Hydraulic Electronic Control Unit) for the ABS could experience an electrical short circuit with a potential that the malfunction indicator light may become illuminated (MIL and /or ABS light)…
On certain vehicles there is a possibility that on one side of the front axle the bolted connection of the track rod ball joint and the wishbone were incorrectly carried out.
On certain Audi e-tron vehicles the bolted connection between the brake pedal and brake servo might not be properly secured. If it loosens the mechanical link between the foot brake and brake servo could…
On affected vehicles clutch dragging may occur which could cause the vehicle to creep forward even when the clutch lever is fully depressed.
For certain vehicles there is a software update available to improve the management of the high voltage battery in the event of an insulation fault.
On Caddy vehicles of a limited production period a fault when tightening the rear left brake line can cause leaks from the brake hose connection. A leak can lead to a gradual loss of…
On motorcycles fitted with the accessory Vario top cases it is possible the case is not securely locked to the motorcycle and may detach.
On affected vehicles the Type Plate may contain incorrectly printed information or has information missing.
On affected vehicles there is risk that a fuel hose may chafe against a wiring harness resulting in fuel leakage onto the engine which might cause smell of fuel inside the cabin excessive fuel…
A small number of 295/30ZR22 (103Y) and 315/30ZR22 (107Y) tyres are subject to a manufacturing variation and are susceptible to experiencing tread deformation or crown separation when running at high speed possibly leading to…
On affected vehicles due to Improper torque applied to the Gear Drive Unit during assembly by the differential gear supplier they may exhibit a grinding noise while driving which can result in a loss…
Transit Connect vehicles fitted with glass panoramic roofs may be subject to wind noise water leak and in rare cases separation from the vehicle.
Affected 2023-2024 model year Polaris Sportsman 850 XP 1000 and XP 1000 S ATVs may experience a fuel leak at the fuel pump flange outlet.
On affected vehicles the passenger seat belt mount for the buckle may not be properly welded. This could result in the anchor point separating from the frame.
On affected machines the high voltage fuse on the MY24 LiveWire S2 Del Mar electric motorcycle may open under certain riding conditions resulting in a loss of propulsion.
On affected vehicles a short circuit inside the EGR (Exhaust Gas Circulation) valve may occur potentially causing the engine to stall before a warning light is displayed.
On affected vehicles the hand pole fixing bracket/casting at the celling may fracture and break free resulting in the potential risk of passenger fall and injury when using the hand pole.
On certain vehicles the steering wheel airbag clock spring may have been built with a design that can allow dust or dirt to enter the mechanism when exposed to certain environmental conditions.
On certain vehicles the under-seat intermediate connection or the rear connection to the Integrated Dual Charging Module (IDCM) may not be tightened to the proper torque which may cause overheating of the terminal with…
On affected vehicles the C Clamp supporting the anti-roll bar may deform and shear at the upper mounting face resulting in increased body roll.