Audi Q3 recall: Checking lap belt tensioner
On affected vehicles the seat belt webbing may not be connected correctly to the vehicle's load-bearing structure meaning it would not be able to restrain the occupant in the event of an accident.
Car, van, motorbike and caravan safety recalls from the DVSA. 2,339 listed.
On affected vehicles the seat belt webbing may not be connected correctly to the vehicle's load-bearing structure meaning it would not be able to restrain the occupant in the event of an accident.
As part of our continuous product monitoring we have identified that due to insufficient contact pressure from the front turn signal indicator socket inside the headlamp unit loss of contact may occur during driving…
As part of our continuous product monitoring we have identified that the affected vehicles were delivered with a faulty batch of parking brake actuators the movement of which may be restricted due to dimensional…
As part of our continuous product monitoring we have identified that a defined production batch of the link rod for the upper supporting joint has not acquired the required material hardness in the production…
On some vehicles the Electronics Stability Control (ESC) warning light and the relative warning message may appear on the Instrument Panel Cluster (IPC) and the ESC may deactivate. In the worst case the vehicle…
The hoses at issue are professional B2B aftermarket replacement parts for commercial trailers i.e. heavy commercial vehicles (i.e. not passenger cars). If used as trailer brake hoses depending on the brake hose connection and…
On a specific batch of vehicles the drivers seat wiring harness may not have been routed correctly which over time may cause it to wear or become damaged. This may stop the seat adjustment…
Front & 2nd row (left & right side) seat belt retaining bolts are not correctly fastened on some vehicles. If affected the seat belt restraint is compromised and there is a chance of an…
Due to changes in production some areas have uneven material and strength to improve the bonnets outer appearance. As a result if the vehicle impacts a pedestrian the risk of injury may be higher.
Affected vehicles may have an issue with the fuel lift pump that could cause the engine to stall.
It has come to our attention that your vehicle is part of a very small number of smart #5 vehicles of which under very specific circumstances the braking software may underperform and lead to…
On affected vehicles the B-pillar label displays the Vehicle Identification Number but the fields for mandatory vehicle weight information may be blank.
Symptom 1 The speedometer is fixed at 0 MPH.2 The speed unit and odometer characters are not displayed.3 ENG cannot start due to software issue. Cause The meter startup/shutdown program is incorrect as a…
Affected vehicles may have an Electronic One-Way Clutch Assembly built with an unseated snap ring which may lead to a sudden and unexpected loss of forward or reverse movement.
For affected vehicles an incorrect Emissions Label may have been installed . As a result the label does not accurately reflect the vehicle’s actual emissions.
Through a self-disclosure by the supplier ZF Friedrichshafen AG Daimler Truck AG was informed that there may have been a manufacturing deviation in vehicles of the models Atego 967 Actros 963 Arocs 964 and…
On affected vehicles when driving with the advanced full beam assist function a deviation of the light distribution of the Matrix Beam headlights occurs resulting in glare for both the vehicle in front and…
The vehicle three way coolant valve may become defective during the vehicle operation. This may result in a risk of the affected component melting.
For certain vehicles BMW Group has developed a package of measures (hardware and software) for the emission control system of the MINI R60/R61.
Fuel leakage may occur due to contact between the fuel line and the battery tray cable. For affected cars this may lead to damage of the fuel line and the risk of a fuel…
On affected vehicles the welded connection of the ISOFIX anchorage points may have been manufactured incorrectly. In very isolated cases it cannot be completely ruled out that the ISOFIX brackets could break in the…
For affected vehicles with a rear seat equipped with an ISOFIX attachment system the welded joints of the ISOFIX attachment points may have been manufactured with a defect and could fail in the event…
Through a self-disclosure by supplier ZF Friedrichshafen AG Daimler Truck AG was informed that there may have been a manufacturing deviation in Atego 967 Actros 963 Arocs 964 and eActros 983 model vehicles on…
On affected vehicles in a combination of very specific conditions the seal within one of the brake master cylinders can deform. This can lead to brake fluid not being released back into the reservoir…