Car, van, motorbike and caravan safety recalls from the DVSA. 3,599 listed.
For affected vehicles with a rear seat equipped with an ISOFIX attachment system the welded joints of the ISOFIX attachment points may have been manufactured with a defect and could fail in the event…
A concern has been identified on certain AJ20-D6 engines where the Front End Auxiliary Drive (FEAD) belt idler pulley may over-rotate following a high torsion input and lead to a clash with and damage…
It has been determined that the external emergency valves may malfunction. The issue is caused by an excessively large bore diameter in a component of the door control valve. Because the diameter lies outside…
On eligible units of 2025 & 2026 W230 (BJ230A) and Meguro S1 (BJ230B) models the turn signal bulbs may fail prematurely due to an improper manufacturing process.
On affected vehicles aged NOx sensors could result in higher NOx emissions when driving leading to a noncompliance of regulations.
Mercedes-Benz AG has determined that on certain GLE/GLS (167 platform) C-Class (205 platform) E-Class (213 platform) S-Class (223 platform) GLC (253 platform) and CLS (257 platform) vehicles with diesel engine the vacuum‑controlled coolant pump…
Affected vehicles may experience loss of communication with the Door modules resulting in the Blind Spot Indicator System (BLIS) feature Window regulator mirror adjust and turn indicator repeater not working during this time. The…
Affected vehicles may experience a fracture of the High Voltage Battery front mounting bracket lower legs potentially causing the battery to drop onto the chassis frame.
For affected vehicles with a rear seat equipped with an ISOFIX attachment system the welded joints of the ISOFIX attachment points may have been manufactured with a defect and could fail in the event…
Mercedes-Benz AG has determined that on certain GLE/GLS (167 platform) vehicles the bolting connection of the rear seat belts might not meet specifications.
A concern has been identified where the connector to the driver’s airbag at the clockspring may experience fretting corrosion over time. This can lead to an increased resistance in the driver’s airbag circuit potentially…
On some vehicles the second-row lower seat bolts may not have been installed. On effected cars a missing bolt may increase the risk of injury if the vehicle was subjected to a collision from…
Potential that the right-hand front shock absorber lower bracket welding may fail and the shock absorber becomes detached from the lower arm. This would cause the vehicle ride height to drop at the front…
Some vehicles fitted with a high voltage battery may have internal cell voltage deviation. If this occurs it may result in the risk of an electrical short circuit inside the battery. Until the high…
Affected vehicles may have been repaired using a coolant pump with a potential issue. This issue may lead to incorrect engine timing resulting in an engine failure causing a sudden loss of power without…
For certain vehicles there may be a non-conformity of the rear suspension springs that could lead to breakage.
Affected vehicles may be equipped with a Driver Facing Camera that may not work as intended and therefore not compliant with current regulatory requirements.
For certain vehicles the ISOFIX mountings may have inadequate weld seams at the attachment points. In the event of a vehicle crash the forces transmitted through a child seat attached to the ISOFIX anchorages…
Vehicles have experienced thermal overload which may manifest in smoke or fire that may occur underneath the rear of the vehicle where the high voltage traction battery is located. The root cause is not…
Vehicles have experienced thermal overload which may manifest in smoke or fire that may occur underneath the rear of the vehicle where the high voltage traction battery is located. The root cause is not…
A concern has been identified where the fuel tank wall thickness may be below design specification near the inlet check valve. A fuel tank with a thinner-than-designed wall may not perform adequately in the…
Mercedes-Benz AG has determined that on certain S-Class (223 platform) and EQS (297 platform) vehicles the bonding of the windshield might not meet specifications.
Vehicles equipped with a 1.5L engine may be subject to engine failure and loss of engine power caused by water pump pulley slippage. This condition may result in timing belt misalignment and engine shutdown.…
Mercedes-Benz AG has determined that on certain CLA (174 platform) and GLB (244 platform) vehicles the software of the communication module might not meet the intended specification.